Jiangsu Soho International Group Wuxi Co., Ltd.  

Product Name: Powder Feeders for Plasma Welding Machine Model NO.: POWDER FEEDERS Cutting Nozzle Shape: Quincuncial Torch Type: Isobaric Cutting Mode: Plasma Control Mode: CNC Type: Plasma Warranty: One Year Power: Available OEM Service: Available Oversea Service: Available Current: Direct Current Trademark: SOHO Transport Package: Suitable for Sea Specification: SGS Origin: China HS Code: 84569090 Product Description Powder feeders:the impeller type powder feeder is used in conjunction with plasma welding and cladding machines and used for surface coating of valves, middle groove, and other workpieces. It can also be used with a laser cladding machine-a high precision powder feeder.Applications:It is a kind of powder feeding device with a plasma welding machine, cladding machine, spray welder. It is used for the surface coating treatment, and strengthening of the workpiece surface of easy-wear parts such as valves, middle groove, shaft plane bore, etc.Product details:The working principle of powder feederThe powder feeder works on the principle of rotating a powder wheel driven by a motor. The powder is fed to the welding torch through gas assist. By adjusting the speed of the engine, the amount of powder feed can be improved. (Note: Observation through the observation hole, the powder wheel can only be anti-clockwise rotation).How to useElectrical connection, make sure the connection is firm and no air leakage. Add soldering powder, screw down the head, then add, screw down the head after adding to prevent air leakage. Turn on the power, rotate the powder feeding speed knob to adjust the speed of powder feeding. Adjust the airflow of powder feeding; the flow is about 5-4L/MIN. Start the powder control button; you can feed the powder work.The choice of particle size of the welding powderThe granularity of the welding powder is not natural to be too large or too small, 80-300um is appropriate.Particles too small to send out the powder is easy to blow away, resulting in decreased utilization of the dust.Particle too large is likely to cause the torch powder feeding channel blocked, resulting in scrap torch.Solder powder must be filtered by the sieve equipped before adding to avoid the above phenomenon.